Guangdong Yuhuaxing Construction Machinery Manufacture Co.,Ltd.
Guangdong Yuhuaxing Construction Machinery Manufacture Co.,Ltd. was established in March 1997. It is headquartered in the Small and Medium Enterprise Park of Mayong Town, Dongguan City, Guangdong Province. It has a registered capital of 46 million RMB and has more than 60,000 square meters of production base and R&D center. A number of experienced staff provide comprehensive services to customers all over the world.
yhx Construction gondola
The hoist is driven and runs up and down along the wire rope. The bearing capacity is large, the lifting speed is high,the operation is stable, safe and reliable,and durable.
anode current collector
Anode current collectoris a main parts of Sliding Contact Line (Busbar).The carbon brushes contact with conductors embedded aluminium strips of Sliding Contact Line,transmit the electricity to hoist motors,to realize the mobile power supply.
The landing door is generally composed of doors, rail frames, pulleys, sliders, door frames, sills and other components. The landing door should be a non-porous door with a clear height of not less than 2m. After the landing door is closed, the gap between the door leaf and the door leaf and the column, the door lintel and the sill should be as small as possible, the passenger elevator should be 1-6mm, and the freight elevator should be 1-8mm.
floor calling system
The floor calling system is a wireless device, using single-chip microcomputer control technology, through wireless transmission and digital display technology to form a set of advanced floor calling solutions: each floor is equipped with a signal sending device, floor calling system The computer coding technology is used to transmit the signal through a dedicated wireless transmission bus, and the signal is accurately sent to the driver, so that the driver knows exactly which floor to use the elevator and drives to that floor.
single cage & twin cage
single cage and twin cage Modular design，easy to make different combinations according to requirement；Adopting high quality steel for increased strength and weight reduction；With many different models of cage door available.
The mast section type is 450*450*1508mm or 650*650*1508mm,use centrally located rack.The rack modulus is 5mm.
retractable loading platform
Used in conjunction with cranes for material transport between the ground and the floor. The retractable loading platform is freely retractable and has a maximum safe load of up to 5 tons.
tower hoist Model YSC175；Rated Capacity 200；No. of Person2； Moving Speed（m/mim)20；Gear Box Model/Gear Ratio 21.34；Cage Size 0.72*1.28*2.2 ；Cage Weight, Drive Weight 320+260；Max. Installation Height 155m；Max. Lifting Height 150m；Installation Condition Out Side；Non Working Max. Wind Speed 150（1）；Working/Installation Max. Wind Speed 55；Top Mast without Wall-tie Height 0.5；Wall-Tie Separation Distance 6 ；Cage to Ground Min. Distance 1.25.
Current collector is a main parts of Sliding Contact Line (Busbar).The carbon brushes contact with conductors embedded aluminium strips of Sliding Contact Line,transmit the electricity to hoist motors,to realize the mobile power supply.
The anode current collector manufacturers take you to understand how the materials of lithium-ion battery collectors are used
The anode current collector manufacturer tells you that the anode current collector usually used in lithium-ion batteries is aluminum foil, and the anode current collector is copper foil. The anode current collector manufacturer tells you that the main function of the collector is to conduct electricity. This is similar to the material of our wire, which is also made of copper wire or aluminum wire.
The anode current collector manufacturers take you to understand the effect of the roughness on the collector
Surface roughness requirements of copper and aluminum foil for lithium batteries: The anode current collector manufacturer tells you that for the current collector, in addition to its thickness and weight affecting the lithium battery, the surface properties of the current collector also have a greater impact on the production and performance of the battery.
The anode current collector manufacturers take you to understand the effects of the thickness on the collector
Thickness requirements of copper and aluminum foil for lithium batteries: The anode current collector manufacturer tells you that with the rapid development of lithium batteries in recent years, the current collectors for lithium batteries have also developed rapidly. The positive aluminum foil has been reduced from 16um in previous years to 8um.